Precautions for air models and selection of fans
In order to take greater care of the inflatable products, please pre-lay some old carpets on the floor before you start to install the inflatable products, so as to isolate the sand or the ground from the wear and tear of the inflatable products to a greater extent.
Please do not turn off the power after the inflatable products are formed. Fan inlet must not have debris, so as not to get involved in causing damage to the fan. Often check the use of the fan has an abnormal ringing should immediately stop to check the cause, troubleshooting before use. When moving the air model products, do not pull the bottom of the air model, in order to avoid adding more unnecessary wear and tear, and then move the air model products, if the air model is too heavy, can be lifted together to move, or will be inside the sandbags out, and then move the product.
Inflatable products in the long term placed outdoors, do not inflate day and night for a long time. Temporarily put away the inflatable products, open the zipper cover, let the inflatable products deflate on their own, do not forcefully squeeze the inflatable products in order to achieve the purpose of rapid deflation. After deflating, please cover the sandbag on the inflatable product, and make sure the huge inflatable product has not scraped on the road or other obstacles such as fences.
Inflatable models are easy to tear and pull, and their stability is relatively low. So in the case of strong winds and heavy rain, do not inflatable use. The bigger the air model is, the more it will be affected by wind and external influence. Inflatable objects above 10 meters in height should not be inflated in winds above grade 5. The air model is an inflatable product, please keep it away from sharp objects when using it. The stability of the air model is also basically based on sandbags, do not use other sharp objects to replace. For example: stone, iron frame and so on.
Other
2024/09/27
Huawei Blower Unveils Latest Products and Technologies at IAAPA Expo Europe 2024 !
"Shunde Huawei Blower will participate as one of the exhibitors in the upcoming exhibition, showcasing its latest inflatable blowers and related products. This includes the upgraded version of the QW series — the EV series blowers — as well as the successor to the REH series — the REV series blowers.
2024/09/27
35 Years of Technical Expertise: Dual Front and Rear Intake, Upgraded Motor Temperature Rise! Dual-Sided Impellers for Faster Performance, Waterproof and Flame-Retardant Certified!
2024/09/27
This device offers internal and external connectivity with a compact size and large capacity.
2024/09/27
Adaptable to a wide range of operating environments without fear of low-voltage effects.
2024/09/27
This high-efficiency equipment features innovative design, durable materials, precise manufacturing, optimal heat dissipation, environmental adaptability, and quiet operation.
2024/09/27
Fully upgraded, compact size, high performance with improvements of up to 10% or more.
Thank You for Your Attention to HUAWEI AIR BLOWER !
HW air blowers enjoy an 18-month product warranty period since producing date.
After the warranty period, paid repair services are provided for the product.
HW provides relevant information about the product, necessary training, and on-site consultation and guidance services.
Contact Us
Add : No.1, Jusheng Road, Hongxing,Rongrui, Shunde, Foshan,Guangdong, China
Tel : 0086-757-28382986
China Office : Sales@Gdhuawei.Com
Uk Warehouse : Hwfans@Outlook.Com
France Warehouse : Contact@Huawei-France.Com
QR code